Nadina’s Free online knitting patterns

Well I’m currently making long (5 to 6 feet) tube scarves on my round knitting looms to donate to homeless shelters, for people in need. I already made hats to donate, too. I find I can also use left-over balls of yarn from my hat looming projects to make the scarves. I just tie and join the different colors of yarn to each other as I knit.
To make a tube scarf on a round knitting loom: begin as for a hat and then keep knitting around the entire circle of the loom for a knitted tube. This is NOT for a flat piece. Add new yarn as you go. I suggest using at least two strands of yarn held together for a warm, thick knit fabric. Measure the length you want (like I said, I prefer from 5 to 6 feet, but you can make shorter or longer scarves if you want to). I prefer to use the small “baby-size” round knitting looms to make my tube scarves, due to it being faster for me to complete the scarves, and the scarves will still fit okay. But you can use any size/width of round knitting loom you want to. No need to buy another knitting loom for this if you have one already. Then finish off as for a hat when you are finished. (more…)

Ewrap a row and knit off.
Next row: (more…)

The depth of a newborn hat will depend on how far you want it to come down on the baby’s head. I do mine about 6 inches or so deep. (more…)

I thought that I would share my method with you and I find that it is much simpler for me
and also much faster (ideal for a knifty knitter beginner as well):

- After wrapping all your pegs, hold the anchor yarn from your skein in your right hand
and bring it down towards your side anchor peg. Then take your left thumb
and place it over the yarn thus holding it against the side of your loom.
Now you can begin to remove your loops – but here is the important part
- instead of lifting the loops over the peg of the first peg wrapped,
lift the loops on the LAST peg you wrapped.
Now you can remove your thumb on the anchor yarn and Voila! your anchor yarn is secured.
Now go to the first peg wrapped and do your stitches like you usually do.
When you get to the last peg, pick up your anchor yarn and repeat the process.
No half-hitch to get loose, no clips in your way – just smooth looming. I have used
this method with the 1 over 1, 2 over 2, and 1 over three stitches and it will work with all of them.

L@@K what I found:

“Product Description
Finally a knitting loom patterns ebook for the loom knitter with easy patterns for more than just hats.

This knitting loom patterns ebook is filled with patterns for sweaters for the baby, toddler and small dog. There are adorable booties, super warm slippers, popular doll clothes and more.

All items are made on the easy to find inexpensive, Knifty Knitter Looms.
Loom projects
Loom knitting eliminates the needles and makes knitting quick as a breeze. No machine needed, the looms are very portable and handy for just about anyplace you want to take them.

Knit loom projects don’t have to be expensive

You can buy expensive looms or make one yourself. If your pegs are spaced correctly you will be able to use any pattern in this book. The price or make of the loom makes no difference in the patterns.

“Looney for Looms” these patterns will all work on any loom with pegs spaced at 3/4 inch

You will find patterns for Christmas gifts, baby showers and just to say I love you. My family loves the slippers, my dogs are toasty warm in the sweaters and the granddaughters love the doll clothes. There are baby booties, slippers for toddlers, hats for friends and lets not forget Dads cold feet.

Adult Slippers, completely lined and knit in one piece. These slippers are thick and warm with a complete lining. This is just one of the many patterns you will enjoy in “Looney for Looms” ”

Baby Booties, made on any knifty knitter loom

Yarn: -two strands of four ply yarn Red Heart Ocean

Cast on to twelve pegs.
Single knit stitch, one row over one row knit back and forth, making a flat piece.

Knit until your flat piece measures three inches. Bring up for cuff. Let beginning yarn end hang and
will take care of later.

Knit three more inches until your flat piece measures six inches.

Remove from loom with gathering method with long yarn end.
Knot and secure end. Sew up side until you get to the cuff. Knot and secure.
Take yarn ends from beginning and bring one strand to other side of cuff.
Knot two yarn ends together. Make a bow and trim excess.

Two and half inches wide. Six inches in length with cuff up,
Four inches in length with cuff down.

I LOVE my Circular Solution needle cases…one for DPs and one for circulars…you can get them from most of the vendors online. They have the sizes marked on the pockets so it is easy to see which sizes I need to buy more of… Actually I was lucky enough to get one (from the creator) that did not have the sizes marked…so I could arrange it just the way I wanted to…
The best, I’ve found, have compartments to organize the needles and a zipper around the perimeter to keep them closed.
Others roll up and have a tie around the middle, also with organizing compartments. The big drawback, I’ve found, is the expense–they are usually FAR more expensive than I want/can afford to pay. My solution is to scour flea markets, sidewalk sales, resale shops, etc., and also E-Bay!
Give it a try– you’ve got nothing to lose, and might get a great “find” for your trouble! (By the way, if one can sew on a fair-to-middling basis, the roll-up kind wouldn’t seem too hard to make on your own!)

There is nothing wrong with knit casting onto the needles. It is the way I have cast on for many years. When you do, try this, it makes for a neater cast. Put the loop on your left needle, start by knitting into that loop and pull yarn through, then up over left needle (2 loops on left needle). From that point on, instead of going directly to the loop (as you would when knitting), place right needle BETWEEN loops on left needle, yarn over, draw through, and place loop over left needle. Going between the loops on the hook makes the edge much neater.

Pulling a loop THROUGH the stitch to cast-on a stitch is called the Knitted Cast-On and pulling a loop BETWEEN two stitches to
cast-on a stitch is called the Cable Cast-On. You can read about A LOT of ways of knitting in Montse Stanley’s Knitter’s Handbook